diy estimator / coastal
Drywall Sheets coastal calculator
Drywall Sheets coastal calculator for DIY Quantity Lab. Sheet count excludes door and window deductions.
Inputs
Live result
5 units
Recommended order quantity
- Net area
- 120 sq ft
- Waste allowance
- 20%
- Exact units
- 4.50
- Order units
- 5
Includes selected waste band. Confirm product coverage on the package label before ordering.
Last Updated:
Published 2026 Fee & Rate Schedule
- Record
- Drywall Sheets
- Variant
- coastal
- Category
- diy estimator
- Coverage Sq Ft Per Sheet
- 32
- Base Waste Pct
- 15
- Unit
- 4x8 sheet
- Stud Spacing In
- 16
- Source host
- www.homedepot.com
- Last reviewed
- 2026-11-21
- Record note
- Sheet count excludes door and window deductions.
- Calculation model
- Diy Estimator
Drywall Sheets is modeled on the coastal variant inside DIY Quantity Lab. The source schedule is www.homedepot.com and the record note is specific to diy-estimator. This page does not blend optional add-ons into the published baseline.
The zero case reads Area 0 square feet; Coverage 32 square feet per unit; Waste band 20 percent; Raw units 0; Order units 0. The midpoint reads Area 250 square feet; Coverage 32 square feet per unit; Waste band 20 percent; Raw units 9.38; Order units 10. The upper case reads Area 2,500 square feet; Coverage 32 square feet per unit; Waste band 20 percent; Raw units 93.75; Order units 94. Keeping those three anchors visible makes the direction of the calculation obvious before a user enters a custom figure.
Diy Estimator uses the record fields directly. Sheet count excludes door and window deductions. Values are recomputed on this page from the benchmark table, and the visible FAQ below describes the limits that matter for this diy estimator record.
Pre-computed benchmark scenarios
| Scenario | Value 1 | Value 2 | Value 3 | Value 4 | Value 5 | Source |
|---|---|---|---|---|---|---|
| Zero input | Area 0 square feet | Coverage 32 square feet per unit | Waste band 20 percent | Raw units 0 | Order units 0 | www.homedepot.com |
| Scenario 1 | Area 10 square feet | Coverage 32 square feet per unit | Waste band 20 percent | Raw units 0.38 | Order units 1 | www.homedepot.com |
| Scenario 2 | Area 50 square feet | Coverage 32 square feet per unit | Waste band 20 percent | Raw units 1.88 | Order units 2 | www.homedepot.com |
| Scenario 3 | Area 100 square feet | Coverage 32 square feet per unit | Waste band 20 percent | Raw units 3.75 | Order units 4 | www.homedepot.com |
| Scenario 4 | Area 250 square feet | Coverage 32 square feet per unit | Waste band 20 percent | Raw units 9.38 | Order units 10 | www.homedepot.com |
| Scenario 5 | Area 500 square feet | Coverage 32 square feet per unit | Waste band 20 percent | Raw units 18.75 | Order units 19 | www.homedepot.com |
| Scenario 6 | Area 1,000 square feet | Coverage 32 square feet per unit | Waste band 20 percent | Raw units 37.5 | Order units 38 | www.homedepot.com |
| Scenario 7 | Area 2,500 square feet | Coverage 32 square feet per unit | Waste band 20 percent | Raw units 93.75 | Order units 94 | www.homedepot.com |
Questions answered on this page
What does the coastal model include for Drywall Sheets?
It uses the published diy estimator fields on this DIY Quantity Lab page: coverageSqFtPerSheet, baseWastePct, unit, studSpacingIn. Optional services are not folded into the baseline.
Where do the Drywall Sheets benchmark numbers come from?
Every benchmark row cites www.homedepot.com. The Last Updated date on this page is 2026-11-21, so a fee or rate update should be checked against that source before a filing decision.
Can a zero or negative input be used?
Zero is accepted and shown as a dedicated benchmark row. Negative figures are rejected because a diy estimator baseline cannot use a negative gross, area, or file dimension.