Skip to calculator

diy estimator / humid

Interior Paint humid calculator

Interior Paint humid calculator for DIY Quantity Lab. Coverage assumes a smooth primed surface.

Inputs

Live result

1 units

Recommended order quantity

Net area
120 sq ft
Waste allowance
22%
Exact units
0.42
Order units
1

Includes selected waste band. Confirm product coverage on the package label before ordering.

Last Updated:

Published 2026 Fee & Rate Schedule

Record
Interior Paint
Variant
humid
Category
diy estimator
Coverage Sq Ft Per Gal
350
Base Waste Pct
10
Unit
gallon
Coats
2
Source host
www.sherwin-williams.com
Last reviewed
2026-11-21
Record note
Coverage assumes a smooth primed surface.
Calculation model
Diy Estimator

Interior Paint is modeled on the humid variant inside DIY Quantity Lab. The source schedule is www.sherwin-williams.com and the record note is specific to diy-estimator. This page does not blend optional add-ons into the published baseline.

The zero case reads Area 0 square feet; Coverage 350 square feet per unit; Waste band 22 percent; Raw units 0; Order units 0. The midpoint reads Area 250 square feet; Coverage 350 square feet per unit; Waste band 22 percent; Raw units 0.87; Order units 1. The upper case reads Area 2,500 square feet; Coverage 350 square feet per unit; Waste band 22 percent; Raw units 8.71; Order units 9. Keeping those three anchors visible makes the direction of the calculation obvious before a user enters a custom figure.

Diy Estimator uses the record fields directly. Coverage assumes a smooth primed surface. Values are recomputed on this page from the benchmark table, and the visible FAQ below describes the limits that matter for this diy estimator record.

Pre-computed benchmark scenarios

Interior Paint humid benchmark scenarios · Last Updated: 2026-11-21
ScenarioValue 1Value 2Value 3Value 4Value 5Source
Zero inputArea 0 square feetCoverage 350 square feet per unitWaste band 22 percentRaw units 0Order units 0www.sherwin-williams.com
Scenario 1Area 10 square feetCoverage 350 square feet per unitWaste band 22 percentRaw units 0.03Order units 1www.sherwin-williams.com
Scenario 2Area 50 square feetCoverage 350 square feet per unitWaste band 22 percentRaw units 0.17Order units 1www.sherwin-williams.com
Scenario 3Area 100 square feetCoverage 350 square feet per unitWaste band 22 percentRaw units 0.35Order units 1www.sherwin-williams.com
Scenario 4Area 250 square feetCoverage 350 square feet per unitWaste band 22 percentRaw units 0.87Order units 1www.sherwin-williams.com
Scenario 5Area 500 square feetCoverage 350 square feet per unitWaste band 22 percentRaw units 1.74Order units 2www.sherwin-williams.com
Scenario 6Area 1,000 square feetCoverage 350 square feet per unitWaste band 22 percentRaw units 3.49Order units 4www.sherwin-williams.com
Scenario 7Area 2,500 square feetCoverage 350 square feet per unitWaste band 22 percentRaw units 8.71Order units 9www.sherwin-williams.com

Questions answered on this page

What does the humid model include for Interior Paint?

It uses the published diy estimator fields on this DIY Quantity Lab page: coverageSqFtPerGal, baseWastePct, unit, coats. Optional services are not folded into the baseline.

Where do the Interior Paint benchmark numbers come from?

Every benchmark row cites www.sherwin-williams.com. The Last Updated date on this page is 2026-11-21, so a fee or rate update should be checked against that source before a filing decision.

Can a zero or negative input be used?

Zero is accepted and shown as a dedicated benchmark row. Negative figures are rejected because a diy estimator baseline cannot use a negative gross, area, or file dimension.